Training, machine and process troubleshooting and improvement, cost reduction programs, scrap handling, machine and plant start-ups for extrusion blow molding, injection stretch blow molding and injection molding. Preform and bottle design, product development.
Specializing in design for rotomolding, automotive, consumer and industrial products from conception through production. 3D solid modeling. Product design through research and development.
Axis Design Co. is a full design service of plastic injection molds, die cast dies, product and part design, standard and progressive stamping tools, jigs, and fixtures. We implement practical and sensible design. Producing 2D drawings or 3D solid models…
Design for manufacturing and assembly (DFMA), design for disassembly, design for recyclability (DFD/DFR). Portfolio on award winning internationally recognized product design. Advanced manufacturing and productivity improvement capabilities.
Increase your productivity and your profit margins. We will give you solutions to resolve your molding problems. There is always a solution for each problem. We guarantee a production increase with savings. Qualified trainer in injection molding. Will train your…
Consultants in new product and material development, process improvement, cost reduction programs, material selection and substitution, international licensing agreements, export development, Industry/university liaison, contract research programs, etc.
Physical and mechanical testing of plastics and rubber including accelerated weathering and colour measurement, UV testing, chemical and failure analysis.
Consulting engineers in the fluids technology industries including breweries, alcohol distilleries and food processing industries.
Compuplast provides advanced polymer processing simulation software and services. We specialize in extrusion, injection moulding, thermoforming and blow molding. We can perform the simulation work for you or teach you how to do it yourself. We also offer education seminars…
Resource Recovery Fund Board, Inc. (operating as Divert NS) is a not-for-profit corporation. Re-branded in 2016, Divert NS administers provincial recycling programs, including the Beverage Container Program and Used Tire Management Program and provides services under contract for the industry-led…
Dynamic Moulds became division of DPM-iTeex. DPM-iTeex concentrates on manufacturing partnerships only. Dynamic Project Management”iTeex” develops turnkey solutions for our project partners. Focusing on Projects development including Moulded Plastic, Extruded Aluminum, and Electronic. Our product ranges from niche industrial to…
Product design.
Texture repair service; mold polishing; glass bead and aluminum oxide blasting.
Product design consulting firm specializing in world-class Product Development services, Industrial Design, Mechanical Design, Product Engineering, 3D CAD Modeling, Plastics Engineering, Prototyping and Manufacturing Support. Evolve Design Solutions has successfully developed products with varied manufacturing processes for the electronics, applicances,…
Consulting and laboratory/testing services. Product and process development, materials characterization, failure analysis, compounding and materials applications problem solving.
Custom plastic part design. Custom moldmaking and design. In-house mold proving and production, using a dozen generic types of thermoplastics and thermoplastic elastomers.
Design and development of injection molded, compression molded, vacuum formed and blow-molded products. Experience in housewares, recreational, home improvement, consumer, as well as medical and industrial products.
Engineering consulting team dedicated to designing and constructing injection molding facilities.
Impact Analytical is a contract analytical laboratory serving the plastics, pharmaceutical, specialty chemical, packaging, medical device, and consumer products industries. For over 20 years, Impact Analytical has provided clients with quality analytical, method development, and problem solving services. FDA registered,…
In-House Solutions provides CAD/CAM, DNC Communications and robotic software, support, tutorials, and training for CNC manufacturing industries and educational facilities. Our areas of software expertise include metal working, woodworking, fabrication, and robotic applications. Some of our core software packages are…
Tests for plastics and polymers, including DSC/TGA/TMA, optical interferometry scanning electron microscopy, micro hardness, mechanical testing, creep, IR/FTIR, x-ray imaging, and environmental testing.
Testing, certification, quality assurance, auditing & inspection services. Environmental chamber testing, vibration, durability/fatigue testing, materials testing, failure analysis, FEA, custom test fixture build. Accelerated stress testing including FMVT (Failure Mode Verification Testing), HALT/HASS, Accelerated reliability and more.
An A2LA (ISO-17025) accredited and NADCAP AC7122/1 laboratory exclusively dedicated to the plastics, composites, elastomers and films industry. Performing all testing from quality programs to failure analysis to material identification.
Contract lab for analysis of polymers. HPLC and GPC columns, reverse phase and anion columns, prep. columns and bulk packing material. PDVB SPE cartridges, RP and normal bullet columns, complete line of accessories. Nylon peptide/protein column.
Turnkey industrial design services, from product strategy development to production. Expertise in leading edge, innovative product solutions and business strategies.
Independent supplier of injection mold designs, product design and 3D modelling. Company provides complete 2D and 3D assembly and detail drawing packages.
Design consultancy and project management/parts processing services to plastic injection molders and designers. Manufacturer of trap accessories for the lobster (trap) fishery.
CAD designing of injection and compression moulds. 3D part development and design.
Technical consulting and process troubleshooting services, product development, appraisals and evaluations, machine and plant installation, start up and maintenance contract services for extrusion and injection molding, carbide encapsulated feed screws, repair and rebuild all feed screws and barrel, barrel alignment,…
Concepts, prototyping, design, engineering, tool start-up for thermoplastic applications. Low-pressure molding and in-mold decorating thermoplastic processes. Specializing in Water Assist and Gas Assist Injection Moulding. Mould- and process development and trouble-shooting. Also thermoplastic composites, long fibre and oriented fibres.
OASIS provides optical alignment, 3D metrology and mechanical services on all types of plastic production equipment, i.e.: Barrel Alignment, Drive Laser Alignment, Towers, Oscillators, Treaters, Laminators, Conveyors, Flexo Printing Presses, Slitters & Winders. Additional expertise: Barrel ID & Screw OD…
Training materials, books and videos on lean manufacturing & improvement methods.
Industrial design, plastic part design, 3D CAD modelling.
Rebuilding, refurbishing, and manufacturing various plastics and rubber processing machines, screws and barrels as well as rebuilds/repairs, appraisals, acquisitions. New and used plastics and rubber processing machinery. Consulting for complete processing plants, anywhere.
Supplies interactive training online, in-plant, or on CD-ROM for plastics processors.
GM-Emissions Reduction/Compliance Linda Drisdelle. Pinchin’s Emissions Reduction & Compliance team is available to act as your environmental partner, ready to identify and manage your compliance needs so you can focus on your core business. We offer rigorous environmental reporting solutions,…
Consulting services for film extrusion and flexible packaging: benchmarking; troubleshooting; equipment procurement; on-site training; raw material selection; project management; quality control; expert witness testimony. Certification of laboratory test equipment. Distributor for Kundig Control Systems; Oakland Instrument Corp. and PSI-Polymer Systems…
Provides research and development service in polymer application, chemistry, technology and processing. Experienced in chemical analysis, testing, resin manufacturing, coating, adhesives, rubber compounding, thermoplastic applications and process development.
Chemical analysis (additives, plastics identification), mechanical testing of rubbers, plastics, polymer composites, deformulation, consulting, R&D contracts, and quality control (from batch to batch).
Company is leading provider of training in the plastics industry. Offers the worlds largest library of online training courses including the largest most up-to-date courses on scientific molding. Routsis puts together complete training systems for entire production workforces. Onsite training…
Permanent, temporary and contract placement of CAD, engineering and technical personnel. Design and drafting services.
Part, product and tool design and manufacture. A full service provider from concept to production.
We are contract mold designer’s with 30 years experience specializing in quality precision multi-cavity mould design, Two stage/colour, Injection Molds, using slides, unscrewing, latches, Plastic Part Design, providing both 3D and 2D using the latest solidworks.
Tool design consulting services. Expertise in cold/hot runner, insert molding and strip molding. Consulting services for product development and best design practices. Outsourcing of tool build through local and offshore mold makers.
