Canadian Plastics

Screen classifying cutter handles variety of materials

The new model SCC-15 Screen Classifying Cutter from Munson Machinery is designed to cut hard, soft and fibrous materials into controlled particle sizes with minimal fines at high rates.

September 1, 2008   Canadian Plastics



The new model SCC-15 Screen Classifying Cutter from Munson Machinery is designed to cut hard, soft and fibrous materials into controlled particle sizes with minimal fines at high rates.

The cutter features a patented helical rotor design with dozens of cutter heads attached to a helical array of staggered holders to continuously shear oversize materials against twin, stationary bed knives.

The cutter tips are available in stainless steel, tool steel and tungsten carbide, and can be slid onto blade holders and secured with one retaining socket-head screw for rapid replacement.

The cutter has a 15-inch (381 mm) throat width and can be fitted with 30 parallelograms with 60 cutter inserts. Bed screen perforations range from 1/32 to 1-1/2-inches (0.79 to 38 mm) in diameter and up to three inches (76 mm) square, according to material characteristics and desired particle size. The shaft rotates at 30 to 3600 rpm, producing up to 500 cu ft/h (14 cu m/h) of sized product, depending on application.

Munson Machinery Co. Inc. (Utica, N.Y.);
www.munsonmachinery.com; 1-800-944-6644
CTEC Process Equipment Sales (Stouffville, Ont.); 905-640-4500
CON-V-AIR, Inc. (St. Hubert, Que.); 450-462-5959


Print this page

Related Stories

Leave a Reply

Your email address will not be published. Required fields are marked *

*