Canadian Plastics

Servo degating option cuts need for hard automation

The ServoGator degating module from Wittmann is designed for mid-size to large robots to eliminate the need for hard automation with a fixed set up for degators.The module mounts on the robot beam and...

June 1, 2002   Canadian Plastics



The ServoGator degating module from Wittmann is designed for mid-size to large robots to eliminate the need for hard automation with a fixed set up for degators.

The module mounts on the robot beam and is controlled directly by the robot controller. A servo AC articulating combination wrist manipulates the end of arm tooling and part into position.

The ServoGator allows one or more nippers to be mounted on its servo-controlled arm for gate cutting. A flexible EOAT kit and some nipper styles are all that is required to remove a range of parts and rotate them for gate cutting.

Teach and store programming and reprogramming of the robot allows different parts to be degated using a single unit, thus reducing cost and floor space requirements.

Advertisment

Nucon Wittmann, Inc. 416-213-5556


Print this page

Related Stories

Leave a Reply

Your email address will not be published. Required fields are marked *

*