Canadian Plastics

Researchers develop new laminate that changes colour when deformed

Canadian Plastics   

Construction Materials Research & Development

The colour change alerts people to a possible material failure at an early stage.

Image Credit: Adobe Stock/oliophotography

Researchers from the Complex Materials Group at ETH Zurich in Switzerland, working in collaboration with researchers from the nearby University of Fribourg, have created a lightweight material that uses a colour change to indicate internal deformation and thus possible material failure at an early stage. Composed of individual layers, their newly developed laminate is translucent, break-resistant and yet very lightweight, and changes colour as soon as the material is deformed.

The technology ties into the expanding lightweight construction sector, which has found its way into many areas, especially automotive manufacturing, shipbuilding and aircraft construction. In addition to traditional lightweight metals such as aluminium, magnesium or titanium, load-​bearing applications are increasingly featuring composite materials. This is driving a need to develop new techniques and methods for the early detection of damage to or even the possible failure of such as yet understudied materials.

The laminate is composed of alternating layers of a plastic polymer and artificial nacre or mother-​of-pearl. The latter is a speciality of the Complex Materials Laboratory and is modelled on the biological example of the mussel shell. It consists of countless glass platelets arranged in parallel, which are compacted, sintered and solidified using an polymeric resin, making it extremely hard and break-​resistant.

The second layer consists of a polymer to which the researchers added an indicator molecule synthesised specifically for this application at the University of Fribourg. The molecule is activated as soon as the polymer experiences stretching forces, and this changes its fluorescence. The more the material stretches and the more of these molecules are activated, the more intense the fluorescence becomes.


“We used fluorescent molecules because you can measure the increase in fluorescence very well and you don’t have to rely on subjective perception,” said Tommaso Magrini, lead author of the study, which was recently published in the journal ACS Applied Materials and Interfaces. The system could also have been set up to produce a colour change that would be directly perceptible from the outside. “[But] the perception of colours is subjective and it is difficult to draw conclusions about changes in the material,” Magrini continued.

With the help of fluorescence, the researchers can now identify overstressed areas within the composite material even before fractures form. This allows early detection of vulnerable areas in a structure before catastrophic failure occurs. One possible application of the novel laminate is in components in the load-​bearing structures found in buildings, aircraft or vehicles, where it is essential to detect their failure at an early stage.

It remains to be seen whether and how the material can be produced on an industrial scale, however; so far, it exists only at laboratory scale as a proof of concept.


Stories continue below

Print this page

Related Stories