Canadian Plastics

Recycling

The RG62 K from Vecoplan LLC is designed for processing large extruder purgings, reject parts, trim scraps, baled or loose film for reclamation and recycling.The unit has a hopper in-feed opening of 63 inches by 80 inches, and allows up to...

October 1, 2010   Canadian Plastics



The RG62 K from Vecoplan LLC is designed for processing large extruder purgings, reject parts, trim scraps, baled or loose film for reclamation and recycling.

The unit has a hopper in-feed opening of 63 inches by 80 inches, and allows up to 6.3 cubic yards of material to be handled at one time.

Once in the hopper, waste material falls into the cutting chamber and is pushed by a two-speed, 10-HP hydraulic feed-ram into the cutting rotor. The RG62 K’s rotor is 15 inches in diameter and has 45 40mm by 40mm cutting inserts bolted into valleys machined in the rotor surface. Each cutting insert can be rotated to four separate wear points prior to replacement, minimizing maintenance costs.

Once cut, material exits the cutting chamber through a heavy-duty industrial sizing screen. Screens are available with a variety of opening sizes that can be quickly and easily changed to control particle size.

The unit is available with drive motors ranging from 75 HP to 150 HP.

Vecoplan LLC (High Point, N.C.)
www.vecoplanllc.com
336-861-6070

Greg Parent (Toronto)
416-678-0154


Print this page

Related Stories

Leave a Reply

Your email address will not be published. Required fields are marked *

*