
Molding Supplies (February 01, 2007)
Ejector pins for high glass content resins
Ejector pins for high glass content resins
Regal Components Inc. is introducing its Regal TT Type Thru-Tuff M-2 high speed steel ejector pins, which are designed for molding with high glass content resins.
Hardened-through to Rc 60-63, with the heads annealed for maximum toughness and easy machining, the pins are flexible but spring back. Additionally, the Regal TT Type Thru-Tuff M-2 pins are hot forged and stress relieved for uniform grain flow and high tensile strength, and precision ground to a 4-10 RMS surface finish and .0003 inch (in.) tolerance. They are available in sizes ranging from 1/32 in. to 3/8 in. in 6 in., 8 in. and 10 in. L (straight and shoulder styles 1/2 in. to 4 in.) in fractional dias., as well as +.0005 in., .001 in., .002 in. and .005 in.
Priced from US$2.41 to $7.12 each, the pins can be special ordered for any .001 in. increment.
Regal Components Inc. (Clearwater, Fla.);
www.regalcomps.com; 800-760-5715
Leave a Reply