Canadian Plastics

Dryers for automotive molders and extruders

With a dry air quantity of 1,060 and 1,412 cfm (1,800 and 2,400 m=h), Motan's new Luxor 1800 and Luxor 2400 Series dryers are designed to handle applications involving very large material throughput r...

June 1, 2008   Canadian Plastics



With a dry air quantity of 1,060 and 1,412 cfm (1,800 and 2,400 m=h), Motan’s new Luxor 1800 and Luxor 2400 Series dryers are designed to handle applications involving very large material throughput rates, such as large injection molded parts, as well as some extrusion.

The 2400 model can achieve material throughput rates of 4,400 lbs./h (2,000 kg/h), which is double that of the company’s Luxor 1200.

With the colour touch-screen panel, all process parameters can be entered and stored in the form of recipes. The entire drying and conveying system can also be operated from this panel.

Intercommunication with controls of the Motan CONROLnet family and PCs is achieved through the IPC based LUXORnet control of the dry air generator and a standard Ethernet interface; therefore, process parameters which are essential for quality assurance can be documented.

Motan Inc. (Plainwell, Mich.); www.motan.com; 1-800-991-9921

D Cube (Montreal); www.dcube.ca; 514-272-0500

Dier International Plastics Inc. (Unionville, Ont.); www.dierinternational.com; 905-474-9874


Print this page

Related Stories

Leave a Reply

Your email address will not be published. Required fields are marked *

*