Canadian Plastics

Clean, versatile flexible screw conveying

FlexFlite Flexible Screw Conveyors from Cyclonaire Corporation use steel augers and flexible tubes up to 100 feet long to move materials at rates as high as 3,600 lbs. per hour.

October 1, 2008   Canadian Plastics



FlexFlite Flexible Screw Conveyors from Cyclonaire Corporation use steel augers and flexible tubes up to 100 feet long to move materials at rates as high as 3,600 lbs. per hour.

The spiral auger is the only moving part that contacts the conveyed material. It is coreless to minimize clogging and has an oval cross-section to ensure positive movement of material through the delivery tube and metering accuracy. Close pitching of the spiral allows increased flexibility, a tighter bending radius, and operation at lower speeds.

FlexFlite is easy to run and maintain. The in-line, geared electric motor rotates the spiral and can be set at speeds suited to the density of conveyed materials, the angle of inclination, and distance and rate of transfer. Fully enclosed construction ensures contamination-free operation. The head housing provides access to the drive shaft for maintenance.

The conveyors are readily portable and ideal for conveying product from bags, bins, hoppers, or weigh stations. Rated capacities for the three FlexFlite models are 100, 300, and 400 cubic feet per hour.

Cyclonaire Corporation (York, Neb.); www.cyclonaire.com;800-445-0730

Con-V-Air (Mississauga, Ont.); 905-285-9934

(St-Huber, Que.); 450-462-5959


Print this page

Related Stories

Leave a Reply

Your email address will not be published. Required fields are marked *

*