Canadian Plastics

Auxiliaries: Universal cooling tower drive Accurate feeding of additives

Philadelphia Gear offers a unique solution to the difficult task of replacing cooling tower drives and spare parts. Base plate spacer adapters make the Universal Cooling Tower Drive modifiable to virt...

September 1, 2002   Canadian Plastics



Philadelphia Gear offers a unique solution to the difficult task of replacing cooling tower drives and spare parts. Base plate spacer adapters make the Universal Cooling Tower Drive modifiable to virtually any legacy cooling tower application by adjusting the height of the output shaft. Also, the location of the change gears has been designed so that a wide range of gear ratios can be achieved by using different sets of change gears external to the main housing. This means that the Universal Cooling Tower Drive can be installed in as little as 24 hours.

Philadelphia Gear 800-766-5120

The Posimax Additive Feeder from Colormax uses a positive displacement channel feeding mechanism to accurately control the flow of material by volume into the process. This patented rotating channel technology has been used successfully for some time in other industries. With rates from 2 to 200 lb./hr., the Colormax unit has an unrivalled turn down and achieves this with excellent linearity over the full operating range. There are no screws or chambers, therefore no requirement to change these in order to reconfigure rates, as with traditional mechanisms.

Colormax 856-256-3285

Advertisment


Print this page

Related Stories

Leave a Reply

Your email address will not be published. Required fields are marked *

*