Canadian Plastics

North American plastics machinery shipments up in Q2, report says

The preliminary estimate of shipments value from reporting companies totaled a 4% increase over the first quarter of 2020, the Plastics Industry Association says, when shipments decreased 19.8% from the previous quarter.

September 1, 2020   Canadian Plastics

Shipments of primary plastics machinery (injection molding and extrusion) in North America increased in the second quarter of 2020, according to statistics compiled and reported by the Plastics Industry Association’s Committee on Equipment Statistics (CES).

The preliminary estimate of shipments value from reporting companies totaled US$263.4 million, a 4.0% increase over the first quarter of 2020, when shipments decreased 19.8% from the previous quarter. However, the percentage decrease in the first quarter of this year was 10.7% lower than during the same period last year.

The value of shipments of single- and twin-screw extruders fell 35.8% and 30.1%, respectively, in the second quarter. Shipments of injection molding equipment were up 11.4% from the first quarter, but down 8.5% from the second quarter of last year.

“Although primary plastics machinery shipments are still lower than the previous quarters, the second quarter uptick is consistent with gradual improvement in the U.S. economy,” said Perc Pineda, PhD., the chief economist with the Washington, D.C.-based Plastics Industry Association.

The CES also conducts a quarterly survey of plastics machinery suppliers asking about present market conditions and expectations for the future. 40.0% of respondents expect conditions to either improve or hold steady in the third quarter – higher than the 18.5% who felt similarly in the first quarter.

As for the next 12 months, 24.0% of respondents expect market conditions to be steady or better, slightly above the 22.6% who felt similarly in the previous quarterly survey.

“It was projected that the plastics industry will experience the worst impact of the coronavirus disruption in the second quarter,” Pineda said. “However, not all sectors of the economy closed.” Many businesses have remained open to ensure uninterrupted supply for products in the healthcare sector, Pineda added.

“There are also other segments in U.S. manufacturing – particularly in nondurable essential goods – that use plastic materials or products that continued operations during the lockdowns,” said Pineda. “Plastics equipment suppliers and converters serving essential consumer end-markets have a reason to be optimistic as economic conditions continue to improve.”

Plastics machinery exports in the second quarter totaled US$289 million, a 21.0% drop from the previous one. Imports rose by 15.0% to US$649.5 million, resulting in a trade deficit of US$360.5 million, 9.0% lower than in the second quarter last year

Canada and Mexico remain the top export markets for U.S. equipment suppliers. Combined exports to the USMCA trade partners totaled US$134.5 million, representing 46.5% of total U.S. plastics machinery exports in the second quarter.


Print this page

Related Stories

Leave a Reply

Your email address will not be published. Required fields are marked *

*