Behind the scenes at the 2008 CPIA Gala awards

Get the Flash Player to see this video.


CanPlasticsTV takes you behind the scenes at this year's 2008 CPIA Gala awards.

More Videos

Attending the Plast-Ex 2013 trade show
video Attending the Plast-Ex 2013 trade show
A look at a new composites research centre at Western University
video A look at a new composites research centre at Western University
Analyst Bill Empey on industry employment challenges to 2020
video Analyst Bill Empey on industry employment challenges to 2020
Analyst Bill Empey on the looming skilled worker shortage
video Analyst Bill Empey on the looming skilled worker shortage
Talking about a new industry report with analyst Bill Empey
video Talking about a new industry report with analyst Bill Empey
Continuing our talk with the CPIA's Carol Hochu
video Continuing our talk with the CPIA's Carol Hochu
Talking with CPIA head Carol Hochu
video Talking with CPIA head Carol Hochu
Talking about composite car parts with Magna International
video Talking about composite car parts with Magna International
Attending the JEC Composites Show in Boston, Mass.
video Attending the JEC Composites Show in Boston, Mass.
UPS tests a new plastic delivery truck.
video UPS tests a new plastic delivery truck.
PepsiCo Beverages Canada is launching a 7UP soft drink bottle made from 100% recycled PET.
video PepsiCo Beverages Canada is launching a 7UP soft drink bottle made from 100% recycled PET.
Attending the Expoplast trade show in Montreal
video Attending the Expoplast trade show in Montreal
The CPIA gets busy with a networking seminar
video The CPIA gets busy with a networking seminar
A look at our 17th annual Resin Outlook Conference
video A look at our 17th annual Resin Outlook Conference
The latest news about NPE2015
video The latest news about NPE2015
FEPAC joins the Canadian Manufacturing Network
video FEPAC joins the Canadian Manufacturing Network
FEPAC's Pierre Fillion unveils a new environmental program
video FEPAC's Pierre Fillion unveils a new environmental program
An evening with the Canadian Plastics Pioneers
video An evening with the Canadian Plastics Pioneers
The CPIA hands out its annual industry awards
video The CPIA hands out its annual industry awards
Behind the scenes at NPE2012
video Behind the scenes at NPE2012
Checking out the CPIA's most recent Plastics Innovation Forum
video Checking out the CPIA's most recent Plastics Innovation Forum
Quebec's Groupe RCM unveils an innovative new plastics recycling line.
video Quebec's Groupe RCM unveils an innovative new plastics recycling line.
We talk polymer roofing shingles with Vision Moderne Slate
video We talk polymer roofing shingles with Vision Moderne Slate
Niigon Technologies turns it around in cottage country
video Niigon Technologies turns it around in cottage country
Behind the scenes at an informative Toronto seminar
video Behind the scenes at an informative Toronto seminar
Moldmaker builds its largest-ever tool for turf pallet project
video Moldmaker builds its largest-ever tool for turf pallet project
Plastics industry members tour Edmonton's mega-recycling facility
video Plastics industry members tour Edmonton's mega-recycling facility
Behind the scenes at the 16th annual Resin Outlook Conference
video Behind the scenes at the 16th annual Resin Outlook Conference
Jim Anderton shows us how to matchmark parts for proper reassembly
video Jim Anderton shows us how to matchmark parts for proper reassembly
New plastics recycler gets its launch in Ontario.
video New plastics recycler gets its launch in Ontario.
Acrolab's advanced thermal engineering products and technology offer unique benefits for composites, injection molding, and packaging applications.
video Acrolab's advanced thermal engineering products and technology offer unique benefits for composites, injection molding, and packaging applications.
Behind the scenes at Plast-Ex 2011
video Behind the scenes at Plast-Ex 2011
Talking with Kara Kuryllowicz, who's writing a book about the past 50 years of the Canadian plastics industry.
video Talking with Kara Kuryllowicz, who's writing a book about the past 50 years of the Canadian plastics industry.
Technical editor Jim Anderton shows the right way to lock cap screws into place
video Technical editor Jim Anderton shows the right way to lock cap screws into place
Visiting with an award-winning plastics recycler.
video Visiting with an award-winning plastics recycler.
Continuing our talk with the CPIA's Greg Wilkinson.
video Continuing our talk with the CPIA's Greg Wilkinson.
Talking with the CPIA's new president and CEO Greg Wilkinson
video Talking with the CPIA's new president and CEO Greg Wilkinson
A look at the Canadian Plastics Sector Council's "Cert. PP" program
video A look at the Canadian Plastics Sector Council's "Cert. PP" program
Talking about the Canadian Plastics Sector Council's new "Essential Skills" program
video Talking about the Canadian Plastics Sector Council's new "Essential Skills" program
We talk mold steel with Bohler Uddeholm.
video We talk mold steel with Bohler Uddeholm.
We visit Victory Manufacturing, a new I/M shop determined to win back contracts from China.
video We visit Victory Manufacturing, a new I/M shop determined to win back contracts from China.
Talking with Tesan Mould about thriving in a tough economy
video Talking with Tesan Mould about thriving in a tough economy
CAMM meeting presents the latest barrier coating technology.
video CAMM meeting presents the latest barrier coating technology.
Checking out the CPIA's first Innovation Forum meeting.
video Checking out the CPIA's first Innovation Forum meeting.
Behind the scenes at the K 2010 trade event in Dusseldorf, Germany.
video Behind the scenes at the K 2010 trade event in Dusseldorf, Germany.
Forecast and pricing highights from our Resin Outlook Conference.
video Forecast and pricing highights from our Resin Outlook Conference.
Behind the scenes at the first CAMM Toronto meeting.
video Behind the scenes at the first CAMM Toronto meeting.
SPE Ontario president Phil Lem on the value of SPE membership.
video SPE Ontario president Phil Lem on the value of SPE membership.
Shop floor tips: The finer points of the Phillips head screwdriver.
video Shop floor tips: The finer points of the Phillips head screwdriver.
We continue our look at mold steel with Bohler Uddeholm.
video We continue our look at mold steel with Bohler Uddeholm.
Windsor, Ont. moldmaker breaks new ground with aluminum molds.
video Windsor, Ont. moldmaker breaks new ground with aluminum molds.
Garry Moore on relocating and setting up processing equipment
video Garry Moore on relocating and setting up processing equipment
We go behind the scenes at CPIA's annual awards ceremony.
video We go behind the scenes at CPIA's annual awards ceremony.
How to ship and install processing equipment
video How to ship and install processing equipment
Checking out the latest technology at Toronto's Conference on Biocomposites.
video Checking out the latest technology at Toronto's Conference on Biocomposites.
Continuing our conversation with the CPIA's Mark Badger
video Continuing our conversation with the CPIA's Mark Badger
The CPIA's Mark Badger breaks down the most recent industry statistics.
video The CPIA's Mark Badger breaks down the most recent industry statistics.
Industry associations CAMM and FEPAC announce their new partnership.
video Industry associations CAMM and FEPAC announce their new partnership.
We talk with FEPAC's Pierre Fillion
video We talk with FEPAC's Pierre Fillion
Behind the scenes at ABB's Robotics Technology Days
video Behind the scenes at ABB's Robotics Technology Days
Canadian Plastics technical editor Jim Anderton is coming to CanPlastics TV
video Canadian Plastics technical editor Jim Anderton is coming to CanPlastics TV
Unique Tool & Gauge
video Unique Tool & Gauge
Behind the scenes at the Biofoam 2009 Conference
video Behind the scenes at the Biofoam 2009 Conference
A behind-the-sences look at the recent Canadian Plastics Resin Outlook Conference
video A behind-the-sences look at the recent Canadian Plastics Resin Outlook Conference
"Intelligent Plastics"
video "Intelligent Plastics"
How to ship and install processing equipment
video How to ship and install processing equipment
Simon Fridyand discusses machine guarding
video Simon Fridyand discusses machine guarding
Resin trends and forecasting information from Bill Bowie
video Resin trends and forecasting information from Bill Bowie
We attend the NPE2009 show in Chicago
video We attend the NPE2009 show in Chicago
The Canadian Plastics Pioneers honour some industry legends
video The Canadian Plastics Pioneers honour some industry legends
We continue our converstation with Mark Badger
video We continue our converstation with Mark Badger
Interview with Mark Badger, the new president and CEO of the CPIA
video Interview with Mark Badger, the new president and CEO of the CPIA
APMA president Gerry Fedchun talks about the state of the auto parts industry
video APMA president Gerry Fedchun talks about the state of the auto parts industry
Simon Fridlyand of S.A.F.E. Engineering discussed the ins and outs of equipment safety standards
video Simon Fridlyand of S.A.F.E. Engineering discussed the ins and outs of equipment safety standards
Canadian Plastics travels to Lossburg, Germany
video Canadian Plastics travels to Lossburg, Germany
Prosin Molds diversified its client base
video Prosin Molds diversified its client base
Humber College in Toronto announced that it would close the Canadian Plastics Training Course
video Humber College in Toronto announced that it would close the Canadian Plastics Training Course
The Ontario government is investing nearly 2.5 million in three local firms
video The Ontario government is investing nearly 2.5 million in three local firms
An economic update for 2009
video An economic update for 2009
Inside look at the growing niche market
video Inside look at the growing niche market
SPECIAL EPISODE: We continue our conversation with Serge Lavoie
video SPECIAL EPISODE: We continue our conversation with Serge Lavoie
The Canadian Plastics Industry Association, plans to restructure into two devisions
video The Canadian Plastics Industry Association, plans to restructure into two devisions
The Canadian Association of Mold Makers (CAMM) hosted their trade fair in Windsor, Ont.
video The Canadian Association of Mold Makers (CAMM) hosted their trade fair in Windsor, Ont.
Talking to APMA president Gerry Fedchun about what his association wants from Ottawa
video Talking to APMA president Gerry Fedchun about what his association wants from Ottawa
An exclusive look at the Expoplast 2008 trade show
video An exclusive look at the Expoplast 2008 trade show
Industry experts talk about when and how to buy resin
video Industry experts talk about when and how to buy resin
13th Annual Resin Outlook Conference
video 13th Annual Resin Outlook Conference
Canadians are heading to the polls, after Stephen Harper called an election
video Canadians are heading to the polls, after Stephen Harper called an election
CPIA's president and CEO Serge Lavoie talks about the state of the industry
video CPIA's president and CEO Serge Lavoie talks about the state of the industry
Dealing with issues like Bisphenol A and plastic bag bans
video Dealing with issues like Bisphenol A and plastic bag bans
Battenfeld technical event, Austria and Hungary and plant tours of several Wittmann manufacturing facilites.
video Battenfeld technical event, Austria and Hungary and plant tours of several Wittmann manufacturing facilites.
Liquor stores in Ontario planning to phase out plastic bags
video Liquor stores in Ontario planning to phase out plastic bags
Behind the scenes at the 2008 CPIA Gala awards
video Behind the scenes at the 2008 CPIA Gala awards
Meet the 2008 CPIA Leader of the Year, Sajjad Ebrahim
video Meet the 2008 CPIA Leader of the Year, Sajjad Ebrahim
Behind the doors of National Research Canada's Industrial Materials Institute
video Behind the doors of National Research Canada's Industrial Materials Institute
The present and future of the plastics industry
video The present and future of the plastics industry
12 Annual Resin Outlook Conference
video 12 Annual Resin Outlook Conference