ASACLEAN - Sun Plastech Inc.
Booth #329

New to the Canadian market will be the unveiling of RED; Reliable, Efficient, Digital the latest generation of advanced machine technologies from Negri Bossi featuring integrated hydraulic performance and electric reliability. RED machines offer up to 50% reduction in energy costs compared to full hydraulic models. CORE 5 Inspired Solutions will showcase advancements Service, Amico™ wireless support, CanBus digital controls, Machine Technologies and expanded Automation capabilities featuring industry leader KUKA 6-axis articulating robots.

Negri Bossi’s machine designs, ranging in sizes from 70- 6000 metric tons, utilize a modular approach to construction for optimum reliability and ease of maintenance.

The SG-24 series of screenless granulators from Shini offer a number of benefits: low horsepower, slow speed (30 rpm), very little dust, low heat, and low noise. The unique design of the cutting blades cuts the scrap in an action similar to scissors, resulting in granulate that is very close to the quality of virgin resin.

These granulators are ideal for beside-the-press recycling of sprues and runners, especially for molders running engineering resins that must be dried before molding. A sprue picker can place the scrap directly into the granulator, and then a blower can move it right back into the hopper of an instant recycling device mounted on the injection molding machine hopper. A system such as this saves drying capacity (so a smaller dryer can be used), and saves drying energy. Plus, if the virgin resin is being colored, it reduces the amount of color concentrate needed.

Ranging from 3 Hp to 125 Hp, these central granulators are designed to grind a wide variety of almost all production scrap: from sprues and runners, blow molded parts, purgings, to tube, profiles and sheet. They are an especially good choice for recyclers and manufacturers of large plastic auto parts.

On the A750/75HP and larger, a rear feed chute is standard, as well as a front feed chute. The rear chute is handy when long, flat parts, such a automotive panels, need to be fed into the granulator.

They come with three rotor configurations, with the blades staggered to balance the load and improve performance. Dual fly wheels assist with the cutting. The machine is fully sound-proofed. A reduced voltage starter results in major energy savings.

The Davis-Standard XP Express™ pre-engineered roll stand system is equipped for the full range of sheet and packaging applications, including capabilities for lamination, solution coating, auxiliary cooling, slitting and trimming, embossing and protective film. It is equipped with high-speed features for thin gauge applications and can be configured in an upstack, downstack, offset top or offset bottom arrangement with roll cooling for three, four or five rolls. Custom models and options are available for both custom sheet applications ("CS") and packaging applications ("PS"). Visit www.davis-standard.com for more information on the XP Express™ and the latest extrusion technology from Davis-Standard, LLC.

Davis-Standard, LLC
Booth 1835

Heins PCM is pleased to introduce its newest development: the LD1000 Leak Detector. Always on the cutting-edge of innovation, our engineering department has designed the unit with flexibility and adaptability as top priorities. The result is a machine that is flexible enough to be adapted to the specific needs of individual customers.

The Heins PCM Model LD1000 Leak Detector is designed and engineered to automatically test for leaks in plastic bottles of various sizes and configurations. The LD1000 is easily integrated into existing production lines or as a stand alone unit. Through PLC control and a touch screen operator interface, the LD1000 is one of the most advanced leak detectors in the world.

Heins PCM Machinery Ltd.
Booth 508